Peel and stick.
Integrated 3M adhesive for mounting on suitable surfaces.
DATA BACKFILL INCLUDEDTemperature logger · with Data BackfillMeasures on site.
Measures on site.
Stores for later.
The Temperature Sensor with Data Backfill stores readings locally when there is no connection to the Cloud Connector. Once a stable connection is available again, the data is automatically backfilled to the cloud.
- Store locally when disconnected
- Up to 100,000 measurement points in local memory
- Automatic backfill through a Cloud Connector
- Can be combined with our pipe mount
For both sensor variantsSmall by design.
Small by design.
Built for everyday use.
These features are shared by the temperature sensor and logger. Data Backfill is exclusive to the logger variant.
Touch to identify.
Touch the sensor and identify it in Studio using Touch to Identify.
Protected electronics.
Sensor with IP68 protection. Not intended for permanent immersion or prolonged humidity near condensation.
Built for long service.
Up to 15 years under standard conditions. Non-replaceable battery.
Choose suitable intervals.
Measurements up to every 30 seconds. Measurement and transmission intervals depend on configuration.
Calibration to suit your needs.
Optional manufacturer calibration: ±0.25 °C from −20 to +50 °C. Enquire separately about accredited certificates.
The variant on offerSmall logger.
Small logger.
Its own memory.
Wireless Temperature Sensor with Data Backfill EU · product number 102683. Sensor technology: Disruptive Technologies.
Request a logger quote| Data buffering | Data Backfill included |
|---|---|
| Offline memory | Up to 100,000 measurement points* |
| When memory is full | Oldest data is overwritten |
| Backfill | Automatic after a stable connection is restored |
| Measurement interval | Configurable, down to every 30 seconds** |
| Indoor wireless range | Up to 40 m indoors with Cloud Connector Gen. 2; installation-dependent |
| Accuracy without additional calibration | Typically ±0.2 °C from +5 to +60 °C |
| Dimensions / weight | 19 × 19 × 3.5 mm / 3 g |
| Temperature measurement range | −40 to +85 °C |
| Battery | Up to 15 years*** · non-replaceable |
| Sensor protection rating | IP68 |
| EU radio | 868 MHz · SecureDataShot™ |
| Offline timestamps | Typical accuracy 1% |
| Calibration | Optional; agree documentation in the quote |
| For setup and cloud access | Compatible Cloud Connector and cloud/software access |
*Storage duration and **measurement interval depend on configuration. ***Battery life under standard conditions; actual use affects it. IP68 applies to the sensor.
The logger also records offline. Once a stable connection is restored, Data Backfill adds the stored readings to your cloud history.
Measurement range and accuracyKey
Key
measurement data.
Measurement range: −40 to +85 °C. Typical accuracy: ±0.2 °C from +5 to +60 °C.
Optional manufacturer calibration: ±0.25 °C from −20 to +50 °C. We help you choose the right configuration.
Find your sensor solutionCloud & DashboardFrom readings.
From readings.
To histories.
Sensor → Cloud Connector → Cloud. View your temperature history in Studio by Disruptive Technologies.
We put together sensors, a Cloud Connector and mounts to suit your application.
Data Backfill · a closer lookStored on site.
Stored on site.
In the cloud later.
Our logger variant stores readings locally when there is no connection. They are automatically transmitted after reconnection.
Prepare your measurement.
Match the Data Backfill variant, measurement interval, planned duration and subsequent cloud access to your task.
Record offline too.
When no connector is within reach, readings initially remain in the sensor's memory. Storage capacity is limited.
Local readings · no live accessConnect. Synchronise.
Once a stable connection is restored, stored readings are automatically synchronised via the Cloud Connector.
We help match recording duration, storage and cloud connectivity to your application.Understand Data Backfill
Equipment and recurring servicesWhat the solution
What the solution
includes.
Hardware is purchased once. Recurring cloud services depend on the sensors and the Cloud Connector model.
Cloud transmission and Studio require a paid sensor subscription from Disruptive Technologies. Your quote includes the terms.
| Hardware | Sensors, Cloud Connector and pipe mounts where needed |
|---|---|
| Sensor subscription | Paid subscription for each activated sensor, for both variants |
| Cellular/Ethernet Connector | Additional paid Connector subscription |
| Ethernet-only Connector | No separate Connector subscription; sensor subscriptions remain necessary |
| Cloud history | 31 days by default; up to three years with an additional paid storage option |
Extended Data Storage: up to three years of cloud history from activation. Separate from local Data Backfill storage.
Your quote lists hardware, subscriptions, terms and optional services separately.
Store and synchronise
Your questions about the logger.
Can the logger record without a Cloud Connector within reach?
Yes, with Data Backfill. Setup and subsequent synchronisation require a Cloud Connector, an internet connection and an active sensor subscription.
How much data can be stored offline?
Up to 100,000 data points. Storage duration depends on configuration and temperature changes. The oldest readings are overwritten when storage is full.
How long does synchronisation take?
This depends on the amount of data, settings and connection. The logger must remain reliably connected for full synchronisation.
Are live readings or remote alarms available while offline?
No. Without a connection, current cloud readings and remote alerts based on them are unavailable. The history can be reviewed after synchronisation.
How accurate are timestamps during offline measurements?
Typically 1%, depending on temperature and time offline. Suitability must be checked for time-critical analysis.
Do I need a subscription for the sensor and cloud?
Yes. Both sensor variants require a paid sensor subscription. The cellular/Ethernet connector also requires a connector subscription. Details are included in your quote.
Two variants. Your measurement task.Measure while connected.
Measure while connected.
Or store locally as well.
Both sensor variants use the same path: Sensor → Cloud Connector → Cloud. Additional local recording distinguishes the logger with Data Backfill.
CONTINUOUS TRANSMISSIONTemperature sensor · EU 102739
Measure while connected.
For ongoing monitoring with reliable wireless connectivity: follow temperature histories in Studio and configure email threshold alerts. Without local Backfill storage.
Explore the temperature sensorEnquire about the sensorWITH DATA BACKFILLTemperature logger · EU 102683
Record offline too.
For measurement series with additional buffering: transmits regularly while connected, stores readings locally during interruptions and backfills them after a stable connection is restored.
Explore the Data Backfill loggerEnquire about the loggerYour next step
Request a quoteReady for greater insight?
Tell us about your application.
Request suitable equipment without obligation.